SSA NEWSLETTER - November I December 2025
|
| Our newsletter is proudly sponsored by: |
SAWMILLING SOUTH AFRICA NEWS |
 |
Here we are almost at the end of another year and as this is the last newsletter for 2025, it’s time to wish you all a blessed and restful Christmas and a prosperous, “full order book” new Year.
This year started off on a tough note for the industry, but it seems that there are signs of “green shoots” with our sawmills reporting better than expected sales volumes. We now need to get the values moving so that we can look forward to good 2026.
Sawdoctor qualification progress
The past month saw a major milestone being accomplished for the sector especially our sawdoctors with the completion of the pilot programme in the sawdoctoring trade test development.
A few weeks ago, we came together with sawdoctors from all over South Africa, joined by the FP&M SETA, the Quality Council for Trades and Occupations, the National Artisan Moderation Body, and our tireless SSA project leader, Dianne Randall. Our own association staff from Pietermaritzburg and the Bracken Sawmill in Greytown rounded out the team.
The objective of the pilot was to put a group of current sawdoctors through the theory and practical assessments that have been collaboratively developed and refined by all the partners over the past seven years. This allowed the QCTO and the National Artisan Moderation Body to evaluate both the testing process itself and the capability of the sawdoctors to successfully carry out the trade test.
I am pleased to say that both the sawdoctors and the trade test curricula passed with flying colours. This is a major step in the final development of the trade and we now expect that the trade of sawdoctor will very soon be registered with the Department of Higher Education and Training, and available to training providers for the official training of South Africa sawdoctors.
Uptick in timber sales
As noted earlier, mills are seeing stronger-than-expected sales, with some reporting stock levels falling to below three weeks — a situation last seen three or four years ago. This upswing is driving heightened merger and acquisition activity and attracting renewed interest from offshore investors who recognise the potential of South Africa’s sawmilling sector. Together with positive signals from Government, the outlook for the industry is looking increasingly encouraging. We also hope that this is also thanks to the work by many stakeholders and partners in promoting the use of timber is the built environment.
Talking Timber webinars
Earlier this month, our Talking Timber team hosted the final webinar for the year, focusing on membranes, moisture, and fire performance in timber construction. Representatives from our webinar sponsors Rothoblaas and Rhinowood took attendees through various aspects of moisture control, airtightness, and fire performance. We are continually encouraged by the increasing participation of architects and structural engineers. We are always grateful for the continued support of the University of Pretoria and Stellenbosch University, as well as the dtic.
Showcasing Timber at the Green Building Convention
This year, SSA supported the timber stand hosted by the University of Pretoria and the York Timbers Chair, a showcase that did far more than display wood products. It told a powerful story: one about choosing materials that heal rather than harm, that store carbon rather than release it, and that leave a legacy rather than a footprint.
The message was simple but transformative — the future of construction is rooted in nature. When timber leads, better buildings follow.
Well done to Prof. Schalk Grobbelaar and his team for creating a standout presence at the Green Building Convention — one that elevated the conversation around sustainable construction and showcased the true potential of South Africa’s home-grown timber industry.
Wrapping up
Michael Peters, executive director of Forestry South Africa, spoke at the AGM of the South African Forestry Contractors Association at which he spelt out just how positive the future looks for the forest sector in our country. You can find his address here.
I hope that we can put the bad times behind us and look to a bright and positive year ahead, but only if we can cut straight, dry flat and keep promoting the good story of home-grown timber.
Cheers from all of us all at SSA. Have a good rest and safe travels, because you will need to come out fighting next year.
Cheers,
Roy Southey
Executive Director: Sawmilling South Africa |
JOIN THE NETWORK
Please follow us on our various social media channels.
LinkedIn | YouTube | Facebook
KEEP US INFORMED
We once again appeal to our members to keep us informed of any news so they can publicise this on our website. And if you spot any interesting articles, please do share them with us. |
What are Wood-Mizer sawmill blades - Crafted for Precision and Performance - |
Sawmill users in more than 100 countries depend on Wood-Mizer’s wide range of blades to cut their timber. For many species of logs, specialized blades are needed for the best cutting performance. Wood-Mizer’s blade testing teams work across Asia, Europe, Africa, and the Americas to develop and improve our selection of blade brands and profiles to meet the most difficult sawmilling challenges. Whatever wood you are cutting, Wood-Mizer has a blade to meet your needs.
SilverTIP sawmill blades are made of carbon steel and are ideal for economical sawing, primary and secondary breakdown, as well as for high volume sawmills and resaws. Carbon is the most common steel used in narrow band sawing and can be resharpened with a CBN grinding wheel, but typically not as often as a blade made with harder high-alloy steel like DoubleHARD sawmill blades. |
 |
- Most common and affordable carbon steel material
- Economical sawing or for high volume sawmills and resaws
- Resharpen with CBN grinding wheel
DoubleHard High-Alloy Steel Sawmill Blades
DoubleHARD sawmill blades are made of high-alloy steel and are durable all-purpose blades for sawing softwoods, hardwoods, knotty woods, and frozen woods. With the combination of harder high-alloy steel and induction hardened teeth, DoubleHARD sawmill blades deliver twice the toughness and twice the sharp life compared to standard carbon steel blades and can be resharpened several times with a CBN grinding wheel. DoubleHARD sawmill blades are tough, durable, and won’t chip or wear down prematurely which is why they are Wood-Mizer’s most popular sawmill blade material. |
 |
- Tough, non-chip high-alloy steel material with induction hardened teeth
- All-purpose sawing of softwoods, hardwoods, knotty woods, and frozen woods
- Up to double the blade life compared to carbon steel sawmill blades
- Durable sawmill blade with multiple resharpenings using CBN grinding wheel
|
BiMetal Two-Piece Steel Sawmill Blades
BiMETAL sawmill blades are made of a two-piece steel with high-alloy steel for the body and high-speed steel (HSS) for the tooth tip. To make BiMETAL sawmill blades, the wire-welded, hardened HSS tooth tip is merged with the body by laser welding and shaped to the right profile. These industrial sawmill blades are commonly used for primary breakdown sawing in production sawmilling operations. BiMETAL sawmill blades hold a sharpened edge up to two times longer than carbon steel blades and can be resharpened multiple times with a CBN grinding wheel. |
 |
- Two-piece high-alloy steel body with high-speed steel (HSS) tooth tip
- Specialty sawing for reclaimed beams or kiln dried lumber and in industrial sawmilling environments
- Up to double the sharp life compared to carbon steel sawmill blades
- Durable sawmill blade with multiple resharpening using CBN grinding wheel
RazorTip Carbide Steel Sawmill Blades
RazorTip Carbide sawmill blades are made from a very hard triple chip tooth configuration with an alternating carbide-tipped raker tooth that can withstand the hardest of hardwoods and provide a very smooth finish. A diamond grinding wheel is required for sharpening due to the extreme hardness of the carbide material. RazorTip Carbide sawmill blades are tough and stay sharper longer in the most difficult sawing conditions such as tropical hardwoods, reclaimed beams, kiln dried lumber, engineered wood, and more abrasive materials. |
 |
- Very hard triple chip tooth configuration with a carbide-tipped raker tooth
- Specialty sawing of tropical hardwoods, reclaimed beams, kiln dried lumber, engineered wood, and more abrasive materials
- Harder teeth than high-alloy steel sawmill blades and up to triple the sharp life compared to carbon steel sawmill blades
- Durable sawmill blade with multiple resharpenings using diamond grinding wheel
|
| Choosing the Right Woodworking Machine for Your Business |
| A Practical Guide to Maximizing Efficiency and Profitability. Investing in the right woodworking machinery is essential for ensuring efficiency, precision, and profitability in your business. Whether you're a small workshop crafting custom furniture or a large manufacturer producing high-volume cabinetry, selecting the right equipment can make all the difference. read more |
|
|
|
| Cape Forest Products Creates A Sustainable Timber Future |
| The merger of PG Bison’s Southern Cape sawmilling operations with MTO Forestry Southern and Eastern Cape operations to create a new company, Cape Forests Products, creates a more sustainable timber and sawmilling industry in the Southern Cape. read more |
|
|
|
| New Outlook Study: Imports Key to US Softwood Lumber Supply |
US housing demand and production constraints ensure a strong import role for lumber, new outlook report finds. The United States has never produced enough softwood lumber to satisfy its own demand.
read more |
|
|
|
| New Market Study: Canada’s Lumber Industry at a Crossroads |
Shrinking capacity and challenging market diversification, new outlook report finds
Canada’s lumber industry is heavily export-dependent. Roughly 65% of Canadian lumber production is sold abroad, and the US remains by far the largest customer, accounting for about 87% of exports in 2025. This reliance leaves Canada highly exposed to US trade policy. read more |
|
|
|
| Timber Industry Braces In Troubled Times |
| The timber industry is battening down the hatches, as it struggles with low demand, increased running costs, and wars and tariffs overseas. Carter Holt Harvey has announced plans to shut its Eves Valley sawmill near Nelson and consolidate its operations to Kawerau in Bay of Plenty, blaming weak markets. read more |
|
|
|
| Wyoming Timber Industry Set For Huge Comeback, More Sawmills Needed, Officials Say |
Long-term success of expanding the Wyoming timber industry hinges on building back the “local timber industry,” instead of trucking logs to mills in other states, Bighorn National Forest Supervisor Andrew Johnson told a legislative committee on Tuesday.
read more |
|
|
|
| SAWMILLS FOR SALE / LEASE: |
| ENTRY LEVEL to EXECUTIVE... |
|
|
|
| Send your news to: bronwyn@fevertreemedia.co.za |
| Feel free to forward to friends & colleagues |
| Copyright © 2025, Fevertree Media (Pty) Ltd, All rights reserved. |
|
|
|
